PRODUCT DESCRIPTION:

1. Automatic speed and steady speed circuit of the electronic governor, have higher stability.
2. This is mainly used for conveying glass bottles, plastic bottles, bottle caps, metal, plastic bags, paper boxes, cartons, labels etc.
3. Easy to spurt the code machine, laser machine on production line, printing code, is each brand spurt the code machine, laser machine for spraying, spraying carving production date, batch number anti-fake mark, design must form a complete set of equipment.

APPLICATION AREA:

It is used to transport glass bottles, plastic bottles, metal cans, plastic bags, carton cartons etc., which is convenient for inkjet printers or laser engraving machines for coding, printing labels, LOGO, production date, batch number, anti-counterfeiting marks, patterns etc.

PRODUCT FEATURES:

(1) High-quality motor, product transportation is stable, Energy saving, high reliability and long service life

(2) Conveyor belt tension adjustment, can adjust the belt tightness according to actual needs

(3) Adjust the height of the baffle, adjust the height of the baffle according to the actual height of the product, and stably transfer the product.

(4) Transmission speed adjustment, the speed can be adjusted according to the actual situation.

(5) Stainless steel material, anti-rust and anti-corrosion.

INSTRUCTIONS:

The first operation sequence is basically performed in the following order
1. First of all, according to the picture shows the machine installed.
2. Plug the power supply into a single-phase power supply (a good ground connection is required).
3. Open the switch button, knob speed twist handle.
4. If you encounter belt deviation, you can adjust the screw inside the rear aluminum block, Each adjustment is just fine adjustment, the belt will run slowly after a few weeks recovery, if transferred too much, the belt will shift to the other party.

KINDLY NOTES:

* Make sure that the power switch is in the "off" state before plugging in the machine, and then follow the manual procedure.
* The machine does not work for a long time to use a dry cloth Sassafras net, do not use a corrosive detergent.
* Do not spill liquid into the inside of the machine box to avoid corrosion or short-circuit the internal electrical components.
* Check the appearance of equipment should be no deformation, damage and corrosion, the shaft should be flexible rotation, no jam phenomenon.
* This machine is single-phase AC 220V power supply wiring for the 3-line flat plug, should be connected to the ground of the 3 plug socket.
* Be careful not to receive 380V power supply, otherwise it will burn the machine.